Project Gallery

Leaf Capelet

Damage Repair

Hepa-Vacuum

Nov 1, 2017

Vacuum leaves (completely back and collar). Vacuum inside and the leaves through screen.

Hepa-Vacuum

Feb 1, 2018

Vacuum leaves on front and rehoused with Vionnet dress.

Display Mount

Feb 20, 2018

Created pattern for Fosshape by tracing capelet on butcher paper. Had difficulty with front flaps but tested fit by placing patter pieces inside (inc. 1/2” seam allowance) and adjusted accordingly. Cut out Fosshape pieces around pattern and pinned together on dress form. Steamed Fosshape using 25% Isopropyl alcohol in distilled water. Used a large soft bruh to help remove wrinkles and poke out corners. For the areas where the Fosshape is not fitted to the form, used a folded up bath towel as a tailor’s ham to apply pressure. Also flipped upside down and opened to steam inside without pressure, helping it harden and seal side seams.

Wet-Clean

Jan 18, 2019

Mixture of enzyme cleaner, vulplex soap, orvus paste, isopropyl alcohol and distilled water applied with swabs to clean ground of cape. Bottom edge and 2” up on left side near fold not done. Negligible change. Some brown lifted on pads, with none after 3 passes and clearing on pads.

Adhesive Repair/Removal

Jan 18, 2019

Began bending wires back down and used porcupine quill to remove accretions of adhesive from leaves.

General Repair

Jan 21, 2019

Tested bleach on organza ground. Bent down wires and removed glue where visible on leaves.

Humidification

Jan 22, 2019 - Jan 23, 2019

Steamed leaves while on padded hanger. Misted bleach on ground (Bleach + distilled water, 3:1). Trimmed frayed edges

General Repair

Jan 28, 2019

Bevatex holes. BevaTex wires onto leaves. Trim frays

Conditioner/Moisturizer

Jan 29, 2019

Cyclomethicone treatment